ads
ads
ads
ads

کد استاندارد جوشکاری زیر آب (Under water Welding Code)

۰۳ تیر ۱۳۹۷(2095 روز پیش) 313 بازدید

این استاندارد مقررات مربوط به جوشکاری زیر آب سازه ها یا اجزای زیر سطح آب را پوشش می دهد. این استاندارد  شامل دو نوع جوشکاری در محیط های خشک و جوشکاری در محیط مرطوب می باشد.

جوشکاری زیر آب در صنایع دریایی از جمله احداث خطوط لوله انتقال سیال و نیز انجام تعمیرات سازه های دریایی مانند اسکله، کشتی، شناور و سکوهای اکتشاف و استخراج نفت و گاز کاربرد دارد.

جوشکاری زیر آب به دو دسته طبقه بندی می شود:

  • جوشکاری مرطوب
  • جوشکاری خشک

در جوشکاری مرطوب، عملیات جوشکاری کاملاً در محیط مرطوب و در تماس با آب انجام می شود اما در جوشکاری خشک، اتاقکی در محلی که جوشکار باید عملیات جوشکاری زیر آبی را انجام دهد ایجاد شده و جوشکار در این اتاقک عملیات جوش را انجام می دهد.

 

جوشکاری زیر آب

  دامنه 

این استاندارد، بررسی جوشکاری زیر آب را در محیط های خشک و مرطوب پوشش می دهد. روشهای اساسی برای جوشکاری زیر آب در ادامه شرح داده شده است:

جوشکاری مرطوب: روش جوشکاری مرطوب زیر آب روشی است که جوشکار باید تحت تاثیر مستقم آب مواد را با یکدیگر اتصال دهد. Fرای این کار تجهیزاتی شامل الکترودهای ضدآب و سامانه مخصوص تامین برق مورد نیاز است.  

– جوشکاری هایپرباریک (Hyperbaric): در این روش از اتاقکی خشک و بدون آب با فشار متعادل برای انجام جوشکاری ایمن و ضدآب برای جوشکاری در نظر گرفته می شود. در این روش می توان تمامی انواع  روش های فرآیندهای جوشکاری قوس الکتریکی از جمله الکترود پوششدار، الکترود تنگستنی و سیم جوش توپودری را اجرا نمود.

مشکلی که ممکن است در این روش ایجاد شود زیاد بدون فشار است بنابراین این روش جوشکاری زیر آب تنها در عمق بخصوصی انجام می شود.

 

جوش خشک – مرطوب: در این روش جوشکار در تماس با آب قرار دارد اما آن قسمتی که باید جوشکاری شود در اتاقک خشکی قرار می گیرد. این روش نیاز به جوشکارانی ماهر که در هردو روش جوشکاری خشک و مرطوب آموزش دیده باشند دارد تا دچار مشکلات ناشی از فشار نشوند. این روش نسبت به روش خشک کم هزینه تر و جوش بهتر و با کیفیت تری نسبت به روش مرطوب ایجاد می کند.

 

 

Under water Welding Code

This code covers the requirements for welding structures or components under the surface of water. It includes welding in both dry and wet environment.

 General Requirements

 Scope

This code covers underwater welding in both dry and wet environments. Five basic methods for underwater welding are covered in this specification as follows

 Welding in a pressure vessel in which the pressure is reduced to approximately one atmosphere, independent of depth (dry welding at one atmosphere

  Welding at ambient pressure in a large chamber from which water has been displaced in an atmosphere such that the welder/diver does not work in diving equipment (dry welding in a habitat

Welding at ambient pressure in a simple open-bottomed dry chamber that accommodates, as a minimum, the head and shoulders of the welder/diver in full diving equipment (dry chamber welding

 Welding at ambient pressure in a small, transparent, gas-filled enclosure with the welder/diver outside in the water (dry-spot welding

 Welding at ambient pressure with the welder/diver in the water without any mechanical barrier between the water and the welding arc (wet welding

This document is intended to define the important variables associated with underwater welding and to describe welding and inspection procedures so that work of a known quality level can be conveniently specified. Three weld classes (A, B, and O) are specified herein. They encompass the range of quality and properties currently produced by application of the various methods. Each weld class defines a set of criteria for weldment properties that must be established during qualification, and a set of weld soundness requirements that are to be verified during construction. Welds in each class must meet all the criteria specified for that class. This code does not address the selection of the class that meets the service requirements of a particular application. The selection of the class of weld to be provided is to be prescribed by the Customer. All provisions of this document apply equally to new construction and to modification and repair of existing structures underwater. This document may be used in conjunction with other applicable codes or specifications for design, construction, or repair

 

در ادامه فیلم هایی در ارتباط با جوشکاری زیر آب مشاهده نمایید:

 

 
 

 

 

 
 

 

کاربران گرامی برای دریافت کامل فایل « کد استاندارد جوشکاری زیر آب(Under water Welding Code) » به بخش دانلود سایت مهندس ایران در ادامه مراجعه نمایید.

 

ads
  • مطالب مرتبط

  • نظرات

  • برچسب ها

دیدگاه خود را بنویسید

دیدگاهتان را بنویسید

background